Davao Sticker Custom
Track the sections of the route that matter
Tell the installer how often you drive on gravel and which vehicle you use. After a typical trip, photograph where dust collects behind the wheels and around the lower doors. Once the vehicle is clean, record chips or scuffs you want assessed. Label the locations by side and panel, since a front bumper, lower door, and wheel arch can each call for a different outline.
Compare lower body coverage with front coverage
Make one group for the areas you see from the front and another for the areas around the wheels and along the sides. Ask for separate prices so you can decide where to start. Have the installer show how each option ends beside flares, mud flaps, or rocker trim. If an accessory is changing soon, identify its future location on the drawing.
Plan the coverage around your actual use
Ask which surfaces the film installer can cover and which need further inspection. Discuss where existing damage may need assessment before the job. If the price limits the first stage, mark the spots you will revisit after another period on the same route.
Use the marked photos to review the work
Take matching photos when you collect the vehicle. Keep the before and after views together, then use them to compare any new marks on the exposed areas later. Check whether the marks appear in the same places after another drive. If one section takes more wear than you expected, ask the installer for a revised outline before adding a piece.
For reviewing specific edges near the wheels, see the wheel arch coverage guide.