Davao Sticker Custom
Identify the step and the painted ledge beside it
Photograph the rear opening with the hatch or tailgate in its usual position. Mark the step, any grip surface, and the painted bumper that meets it. If the step is a fitted accessory, tell the installer which part it is and how it attaches if you know. Show where shoes or equipment pass closest to the painted area.
Ask for a clear painted coverage outline
Have the installer mark the painted areas they propose to film. Ask them to show where the line stops at the step and how it turns around the corners. If the step or protector hides part of the paint, ask which areas they can confirm without moving it. Keep any proposed trim work separate on the estimate.
Check the layout with the step in use
Show the installer where you normally load or step and where the tailgate or hatch sits. Ask whether the proposed piece covers the painted contact point you marked. If it stops short, have the installer show what is exposed and discuss a different outline before approving.
Check both ways a load reaches the step
If you load from the curb and from directly behind, take a photo from both positions. Point out any painted corner that is only used from one approach. Ask the installer whether that corner belongs in the same piece or a separate option.
Save the drawing with the step details
At pickup, compare the finished edges with the marked photos. Ask the installer to point out the film nearest the step and save an open-hatch view for future cleaning or service.
For mapping luggage contact across the opening, see the loading sill coverage guide.