Skip to content
Cart
← The DSC Journal

How to plan vehicle copy around retractable steps

Keep the complete message on a suitable fixed panel and check the step’s stowed and working positions before fitting.

Vehicle graphics
Davao Sticker Custom

Have the operator show both normal positions

With the vehicle parked, take photos from outside the step’s working area. Mark the mounts, controls, traction surface, and warning labels. Ask the installer to review the relevant vehicle and step guidance. Keep operating and traction features clear. Tell the designer which parts stay fixed to the vehicle and which move.

Place the main line on a clear fixed area

Ask for a proof with the step visible in both positions. Compare a suitable higher body panel and another fixed area if the door or step hides the first one. Keep the whole name or instruction in one place. If a stripe runs below the copy, make sure readers can identify the business without seeing it. If the vehicle usually boards people from a particular side, use that approach for both proof views. Ask the owner to confirm which message also needs to remain visible when the doors are shut.

Check the parked setup with the crew

Hold a paper proof against the body and ask someone to read it from the normal approach. Remove the sample before operating the step or vehicle. Have the operator and installer verify that the approved position leaves access and functions clear. Repeat the check if another model has different equipment.

Record the position with both setup photos

Save the artwork size and fixed panel references. Give the fleet contact the completed view so a later installer can confirm the same setup. Label the photos with the actual step option fitted to the vehicle. Date the two setup photos.

Use the side step layout guide to record the general view and boarding setup.

Request a project quote

Share photos of the step stowed and deployed and tell us what people need to read.

Discuss your project →