Davao Sticker Custom
Decide which reference the receiving desk needs
Ask staff how they match a returned box to an open case. Choose a short reference they can read or enter from the box. Keep the design separate from the carrier label and ask which details need to stay inside the package. If the reference differs by order, give the printer an example with fictional data to show how the variable area should fit.
Mark a place that survives normal opening
Use a filled box and mark where the outgoing label, return label, and closure sit. Try the reference sticker beside those areas on a flat panel. Reclose the sample and see whether the reference is visible without lifting the box. If it goes under a new shipping label or across a flap, try a second position before you order.
Test a return with two similar case numbers
Give the receiving desk two closed sample boxes with similar references. Ask staff to read each number and find its matching case. Check what happens when one box arrives upside down or the carrier label faces the aisle. Adjust the character spacing or sticker location if staff keep using the shipping code by mistake.
Record the approved setup for repeat orders
Save the reference format, sticker dimensions, and a marked placement photo. Ask the printer for an appropriate sample if the box finish changes. At the packing table, keep the approved example near the box stock and check it again if a different carrier label takes up more room.
For the closure and instruction positions, see the two-way mailer sticker guide.