Skip to content
Cart
← The DSC Journal

How to place vehicle decals beside a utility box hinge

Mark how the hinge and door work, then choose a decal position that stays readable without crossing the moving edge.

Vehicle graphics
Davao Sticker Custom

Show the hinge and the surrounding face

Photograph the utility box on the parked vehicle with the door shut. Take a close view of the hinge, fixings, trim, and any recess. Ask the crew where they grip the door or reach for tools. Open it with no mockup in place and mark the hinge and access areas that need to stay clear.

Choose a complete design on one clear surface

Ask for one proof beside the hinge and another farther away. Use the same wording and size. Look at the gap between the decal and hinge at both ends. If the artwork approaches the working edge or is hard to read from an angle, move the entire line to a clearer area. If the box has more than one hinge, show which one borders the proposed artwork. Measure from a fixed edge as well as the hinge so a replacement crew can find the same position.

Confirm the actual surface and door movement

Ask the installer to check the material and proposed boundary on the fitted box. Hold a paper sample with the vehicle parked, then remove it before moving anything. If the box door will carry a mark that must be visible while open, review a suitable fixed body position as well.

Save the hinge view and measured position

Record the box model, side, and reference points. If the door or hinge changes, ask the installer to verify the clearance before reprinting. Give the installer a photo of the box shut and mark where the decal should end.

Use the side-loading compartment guide for the wider working setup.

Request a project quote

Share photos of the utility box shut and open with the hinge visible.

Discuss your project →