Davao Sticker Custom
Photograph the handle from more than one angle
Take a straight side photo and a close view from the front and rear of each pickup door that will get graphics. Show the recess around the handle, along with any trim or key opening. If the passenger side uses a different handle or has a different piece of trim, mark that difference before the designer uses one side as the model for the other.
Find the area the driver’s hand uses
With the pickup parked, have someone open each door as they normally would. Watch where fingers touch the recess, where the handle moves, and where a gloved hand might reach on a work shift. Identify any key access or touch sensor for the installer. Keep the decal and its edges clear of moving parts and access points.
Mock up the wording with the clearance in view
Ask the designer to show the handle on the proof and mark the planned space around it. Try holding a paper version against the door. Look for letters that appear too close to the recess, even if the decal fits in the flat area. Shift the line, shorten the wording, or move it to a lower part of the door if the handle interrupts the layout.
Record the position from a fixed body line
Note the distance from the decal to a door edge or trim line that you can measure on both sides. Ask the installer to confirm the final clearance in person. Approve the placement by door and note any differences between the driver and passenger sides. If you also order decals for the rear doors, give those handles their own reference photos.
Once you have a clear placement, try the full-size door lettering test to check readability.