Skip to content
Cart
← The DSC Journal

How to plan a partial wrap for a pickup with a bed liner

Show where the liner covers the bed and tailgate before approving the artwork and wrap outline.

Vehicle graphics
Davao Sticker Custom

Photograph the bed with the tailgate up and down

Take side and rear views, then show the liner where it meets the top of the bed and inner tailgate. Mark any cap, rail, or accessory that overlaps painted surfaces. Tell the installer whether the liner will stay, be replaced, or move during the job. If another business handles it, share that plan before approving the drawing.

Keep the artwork within the surfaces you can see

Ask for a mockup with the liner, tailgate, and rails in place. Look where a stripe ends by the bed lip and where lettering sits when the tailgate is open. If the same design appears on both sides, check it beside the fitted parts in both views. Mark anything the liner would hide.

Agree on the painted boundary and access

Ask the installer which painted areas the wrap can cover and where the edges would stop at the liner. Keep any work on the liner or bed accessories separate on the quote. If you want the wrap to reach a part that is usually covered, ask what access they need to confirm the scope.

Review one view from the usual loading position

Stand where the crew normally reaches the bed and check which parts of the artwork remain visible. If the liner hides the end of a stripe, compare a shorter layout on the same photo. Have the designer label the final line beside the rail and tailgate.

Check the layout in working position

Keep the approved open and closed views. At pickup, compare the edge and the artwork with the liner and tailgate in their normal positions.

For reviewing tailgate graphics, see the pickup tailgate wrap guide.

Request a project quote

Send pickup side and rear photos with the liner edges and accessories in view.

Discuss your project →