Skip to content
Cart
← The DSC Journal

How to proof a matte wrap for a motorcycle tank

Review the tank’s curved surfaces, touch points, and nearby finishes before approving the film and artwork.

Vehicle graphics
Davao Sticker Custom

Photograph the tank from the rider and side views

Take views from both sides and from where the rider sees the tank. Mark the cap, badges, pads, and painted curves. Tell the installer if the tank or cover has been repainted. Show where you grip the tank or where a bag usually sits. Ask which areas the installer wants to inspect and which will remain exposed.

Compare the sample next to the rest of the bike

Review the exact matte sample in open shade and daylight. Hold it beside the tank and the neighboring fairing or side cover. Check how the finish looks under a reflection and where an original paint line may stay visible. If artwork crosses a curve, ask for a mockup from the rider and side viewpoints.

Review the finish and outline together

Ask where film would end around the cap, pad, and seams. If the installer proposes more than one piece, ask to see where the joins would sit. Confirm how they plan to handle existing pads or badges and what their estimate includes.

Review it with your usual riding setup

If you use a tank bag or a removable pad, show how it sits before the installer confirms the outline. Ask where the film would end beside the part and what would remain visible with it removed. Save both views so you can compare the installed finish with the approved proof.

Keep the finish reference and care sheet

Save the approved sample and outline. At pickup, compare the finished tank in similar light and collect the written care instructions for the film.

For graphics on the same panel, see the motorcycle tank stripe proof guide.

Request a project quote

Send tank photos from both sides and the rider’s position, with pads and trim marked.

Discuss your project →