Skip to content
Cart
← The DSC Journal

How to match wrap graphics on two utility trucks

Use matching artwork and separate vehicle proofs so the message stays consistent despite different equipment or panels.

Vehicle graphics
Davao Sticker Custom

Identify the common message and the different truck setups

Write down the name, service, and contact detail that both trucks will use. Take straight side and rear photos of each with the usual boxes, steps, or racks installed. Mark the panel breaks and working doors. Identify which truck sets the artwork reference and which details must be adapted. Give every photo a vehicle label so the designer can match the right equipment to each proof.

Compare the proofs as a pair

Ask for the same viewing angles for both trucks. Look at whether the logo reads at a similar size and whether both contacts sit in a visible position. If equipment on one truck forces a change, move the artwork to a usable area rather than assuming the same dimensions apply. Check the proofs with working doors open where the trucks are seen during service.

Keep production and installation scopes by vehicle

Ask the installer to mark the film stops and list any separate preparation or access. Check the exact film and color reference on both estimates. If one truck is installed first, compare it with the approved artwork before releasing the second file. Ask whether a change made during installation needs to be reflected on the other proof.

Confirm the contact on both trucks

Ask the fleet lead to check the number or website against the current business record.

Save a record of both finished trucks

Take matching photos and keep each artwork file with its own estimate and installation date. Compare the common message one last time before handing the vehicles back to the crew.

For handling vehicle differences across a larger group, see the fleet graphics guide for different models.

Request a project quote

Send both truck setups and mark which artwork details must match.

Discuss your project →