Davao Sticker Custom
Choose sheets that show the actual variation
Pick a light sheet, a dark sheet, and one with more visible fibers if those differences occur in the batch. Show where you want the logo and mark any rough edge or pressed detail the sticker should avoid. Tell the printer whether the paper folds into an envelope, sits flat on a card, or gets handled by shoppers. Include an offcut for each finish you plan to use.
Compare the logo without hiding the paper by accident
Place a printed sample on each sheet. If you want the paper to show through, compare a clear sample with one that has a solid area behind the logo. Check whether a fiber or dark patch interrupts a letter. For an opaque label, see how the sticker edge reads against the paper from normal viewing distance. Keep the viewing angle and lighting the same across the samples.
Check the edges after ordinary handling
Apply the samples as the material supplier recommends and try the usual fold, stack, or sleeve. Look for an edge that lifts where the paper bends or changes texture. If the paper is meant to be kept after the sticker comes off, test removal on a spare sheet and report any fiber damage. Save the sheet and label details with the approval.
If you buy handmade paper in batches, label the tested sheets with their batch names. When a new batch arrives, compare its roughest area with the approved example before putting the labels on all the finished pieces.
Mark any paper variation that needs its own sample. For isolating the effect of texture, see the textured surface sticker guide.