Skip to content
Cart
← The DSC Journal

Checking label fit on a jar with a raised seam

Find the raised seam on your jar and compare label positions that avoid it or leave a gap in the wrap.

Jar seam label proofs
Davao Sticker Custom

Mark the raised line before measuring the label

Turn the jar under a light and find the line you can see or feel in the glass. Mark it on a photo of the jar standing upright. Measure the usable area between the seam and the part of the shoulder or base that curves away. If your jars come from more than one lot, check several. Put the label mockup where it can stay clear of the seam.

Decide where the seam belongs in the finished view

Try a front label centered on the smooth panel and check what the shopper sees. For a wrap, test whether the label ends can stop on either side of the raised line without cutting off text. If you need to cross the seam, ask the printer for a sample and compare it with one that stops short. Check for a visible ridge or lifted edge in the printed result.

Give the seam a reference in the packing setup

Have a packer apply a sample using the seam as a starting reference. Check where the front wording lands on several jars. If you use a machine, test the intended orientation and record the result. Keep one approved jar with the placement marked.

If the jar has a seam on each side, test the usable panel between them with a full wrap mockup. Keep the supplier and jar code in your notes so a replacement jar can be checked against the same proof.

For jars that also narrow toward the shoulder, see the tapered label proof guide.

Request a project quote

Send the jar dimensions and a close photo showing where the raised seam runs.

Discuss your project →