Davao Sticker Custom
Show the ladder and the whole rear of the vehicle
Take a straight rear photo and one from each corner with the ladder installed. Mark the rails, steps, mounts, handle, and any part that moves. Tell the designer where customers usually approach and whether staff use the ladder at stops. Keep attachment and access areas clear in the proof.
Put the whole contact line outside the obstruction
Ask for a proof with the number or web address on one clear area. Compare a position beside the ladder and another above or below it if those areas are suitable. Check the angled view as well as the straight view, since a rail can hide characters that look clear from behind. If the line also appears on a side panel, have the owner decide which one customers should use when the rear is blocked. Show both on the same proof to catch conflicting details.
Have a reader repeat the exact information
Hold the paper proof on the parked vehicle and ask someone to read the complete line from the usual approach. If equipment or a door hides part of it, try a fixed side position. Remove any mockup before using the ladder, doors, or vehicle.
Record the approved location with the ladder type
Save the piece size and a measured placement reference. Repeat the check if the ladder changes. Keep the rear and corner views in the approval. If a second vehicle has a ladder with different rails or mounts, check that vehicle separately. Ask the driver to confirm the contact details against the approved text.
Use the open-door branding guide if rear doors also change what customers see.