Skip to content
Cart
← The DSC Journal

How to find a logo position on a minibus sliding panel

Locate the clear painted area on the minibus sliding panel and check the logo while the vehicle is parked for boarding.

Vehicle graphics
Davao Sticker Custom

Mark the painted area of the fitted panel

Photograph the side of the parked minibus with the door shut. Show the glass, handles, rails, steps, and body seams. Give the designer the width and height of the clear painted section and identify the model or body conversion. Use the actual vehicle rather than a stock outline if the minibus has a different door or window arrangement. Ask the installer to confirm which parts need clearance.

See what passengers see while boarding

Photograph the same side with the door in its usual boarding position. From a safe place, look at the panel from the normal passenger approach. Mark any part of the logo area that the door, a rail, or another feature hides. Decide whether the logo needs to read while the door is open or only when the vehicle is parked with it shut.

Try the logo on the panel and on a fixed area

Ask for two proofs at the same size. Put one within the clear moving panel and the other on a suitable fixed area. Hold each paper proof against the parked vehicle and remove it before moving the door. Compare the two positions from the boarding approach and choose the one that meets your visibility goal.

Record the position by vehicle and side

Save the approved dimensions, door position, and a measured reference. Check another minibus separately if the glass or trim differs. If the panel is used on both sides, ask the installer to review the actual movement on each side. Label the approved open and closed photos by vehicle.

Use the sliding door proof guide to record the open and closed views.

Request a project quote

Share side photos of the minibus with the sliding panel open and closed.

Discuss your project →