Davao Sticker Custom
Decide what changes when the card turns
Set the card into its holder with each face forward. List which information belongs to one face and which needs to be visible on both. If one sticker carries a price or code, decide whether it goes on each face or on a fixed part of the holder. Mark the bottom edge and the part the holder covers in both orientations. Measure the space the customer can see.
Test two physical views with the sticker in place
Print the mockup at actual size and apply it where you intend to use it. Turn the card the same way staff will turn it. Check that any text stays upright and that a rail or clip leaves the full mark visible. If the faces use different designs, identify the pair in the artwork proof. Ask a second person to match a sticker to the correct side before you approve.
Rehearse changing the display during a shift
Have staff switch the card and read the message from the customer's position. If the sticker also changes, mark where the new one goes and test the approved removal method on a spare. Keep photos of both views near the display supplies.
Make one sample with the holder turned the way staff would see it during setup. Check whether a sticker on the rear becomes hidden under a tab or appears upside down when the card turns. Mark the approved top edge on both proofs so staff can match them.
For checking a sticker alongside a small card and its holder, see the small display card proof guide.