Davao Sticker Custom
Identify the side the sticker will touch
Check whether the acrylic has a textured face, a smooth face, or a separate film that creates the frosted appearance. Ask the panel supplier if you cannot tell. Mark the proposed application side and the side people will read. Send photos under the intended lighting, including a side view if the panel has a light behind it. Ask the sticker printer which sample and application method suit that particular surface.
Compare the same artwork in place
Apply samples as directed on an offcut or an approved test area. If you are choosing between a clear and opaque design, put them at the same height and compare the same letters. Look from the visitor's position when the light is on and when it is off. Check whether the outline interrupts the frosted effect or the words lose contrast. For viewing through the panel, make sure the artwork reads in the correct direction.
Look closely at contact and appearance
Check the edges in angled light after the supplier's recommended wait. Compare any visible spots with the panel texture and show them to the printer before changing material. Keep the sample and a photo of the approved viewing side. Record the position of the light if it reveals an edge that disappears in other views. If the panel gets wiped regularly, include that step in the sample trial using the panel maker's care instructions.
For artwork intended to read through a clear surface, see the reverse logo proof guide.