Skip to content
Cart
← The DSC Journal

Testing vinyl stickers on a poolside gear caddy

Find an ID that stays visible with the caddy loaded and test the label after splashes, carrying, and the usual cleanup.

Poolside gear caddy stickers
Davao Sticker Custom

Choose a location above the usual splash or drip path

Fill the caddy with the gear it carries and note where water collects. Mark where staff hold it, where another caddy nests, and the face that stays visible on the rack. Put a paper mockup in the proposed position and check it with the handle raised and lowered. Show the printer whether the panel is smooth plastic, textured plastic, or a coated part.

Run the sample through a normal poolside shift

Apply the recommended sample as directed. Carry and set down the caddy the way staff do. Check the sticker after splashing and after the gear has dripped into the tray. If the sticker faces a particular cleaner or exposure, confirm that the sample is intended for it before testing. Compare the print and edges with a second sample placed away from the wettest spot.

Check the result at closing and the next opening

Wipe and dry the caddy as you normally would. Read the ID with gear in place and note any edge that catches while the caddy goes into storage. Keep a photo of each position and record where the first problem appeared. If caddies differ in color, compare the same mark on the hardest color to read before approving a common sticker.

If several caddies return to a shared rack, have one person find a labeled caddy without lifting the others. Check that the ID stays visible when a towel hangs over the handle. Move the sticker if the towel hides it.

See the waterproof sticker testing guide for a related check.

Request a project quote

Show us the caddy material, carry points, and how staff clean it.

Discuss your project →