Skip to content
Cart
← The DSC Journal

How to compare reflective decals for rear and side recognition

Check which markings can be seen and read from the rear and side under comparable conditions, then approve the positions separately.

Vehicle graphics
Davao Sticker Custom

Set a separate task for each view

Ask the fleet contact what the rear and side markings need to identify. If a specification applies, confirm it before reviewing samples. Mark the proposed areas and existing lights, reflectors, and labels. Ask the installer to confirm product suitability and keep the vehicle’s working and safety features clear.

Compare the same sample from both positions

Use a safe private area with the vehicle parked. Start in daylight and compare the complete wording at the rear and side from the usual approach. If a low-light check is needed, record the light source and viewer position. Keep the sample construction and size the same so you can compare placement. If the rear and side need different wording, first compare how the same sample appears from each angle, then test the exact final text where it will go.

Record what each observer can identify

Ask a reader to name the unit or wording at each point. Note if a railing, open door, or cargo hides part of it. If you choose a different position on one side, repeat its test. Have the responsible person verify any separate marking requirements.

Approve and label the views separately

Save the rear and side positions, dimensions, sample codes, and test photos. Put each location on its own line in the order. Keep the daylight and low-light observations separate. Ask the fleet contact to review the approved location before the installer repeats the layout on other vehicles. Save the exact viewing distance and angle with each photo.

Use the reflective photo proof guide for the camera and lighting record.

Request a project quote

Share the intended marking, rear and side photos, and any required specification.

Discuss your project →