Davao Sticker Custom
Check the surface the label touches
Take a tin from each finish and mark the label position. Ask whether either finish has a coating and note which way the brush marks run. Include the tin lid and show how staff handle or open it. Give the printer the actual surfaces so they can suggest samples for both. Compare the tins with their usual contents inside if filling changes where staff grip them.
Apply matching samples to both tins
Use the material directions and give the samples the same wait. Put each label on an equivalent part of the tin. Look straight on and then tilt it under the display light. Check whether the brush pattern shows through clear areas or a glossy highlight crosses small text. If the edge appears uneven, check whether it is only a reflection or whether the film has actually lifted.
Run the handling check before choosing one label
Open and close the tins as customers would and check whether a finger or lid catches the edge. Use the normal approved wipe if the tins get cleaned. Save the results by finish, with a photo from the angle where the difference appears. If one finish needs an opaque field or a different material, record that in the order before both tins go into the same packing area.
If the lids turn, take one photo of each tin with its lid in the usual closed position. Confirm whether the sticker needs to align with the lid or can be read independently.
See the metal sticker application guide for a related check.