Skip to content
Cart
← The DSC Journal

Comparing a cut sticker and a printed outline on glass

Check the same mark as separate cut shapes and as printed artwork on clear film, then compare the edges from the reader's side.

Glass sticker outlines
Davao Sticker Custom

Show where the glass should remain visible

Put the artwork against the glass and mark the spaces you want to keep open. Ask for a sample of the cut version and a printed outline on clear film if both are available. Confirm which face of the glass takes the sticker and which side people read from. Include the background they see through the glass, especially if it changes during the day.

Apply the two samples in the same conditions

Place both samples in equivalent spots using the supplier's directions. Look at the gaps inside the logo and the edge around the printed version. If the cut version has several separate pieces, check how easily you can align them. Read the outline from normal distance and check the result again when the glass reflects an interior light or bright background.

Compare application and cleaning as well as appearance

Ask the person who installs the sticker to try the preferred option on a spare panel. Check the alignment and look for a loose edge after the normal approved wipe. Record which view you tested and keep the proof with a photo from the reader's side. If you need the same design at another size, ask the printer to assess its smallest shapes again before repeating the cut.

If the mark reads from both sides of the glass, photograph both finished samples from each side. Check whether a printed edge or the spacing between cut pieces changes the result for the second reader.

See the clear logo sticker design guide for a related check.

Request a project quote

Send the glass location and the outline you want to compare.

Discuss your project →