Davao Sticker Custom
Find a part of the pack that keeps its shape
Freeze the pack in its normal position and look for a panel that stays easy to read after it hardens. Compare that area when the pack is thawed. Mark seams, filler ports, and folds that bend sharply. If the pack sits beside food or drinks, choose an external label position consistent with the pack maker's instructions. Show the printer how it fits into the cooler.
Test the location on a thawed and frozen pack
Ask which sample suits the exterior and the temperature when the label goes on. Apply it as directed and note whether the surface is dry. Try a second matching label on a flatter spot. Freeze both and put them into the loaded cooler. Check whether an edge gets trapped under a bottle or touches the bottom when the pack shifts. Read the name while the pack is still cold.
Compare the labels after the full return cycle
Let the packs thaw and wipe them as you normally would. Photograph any lifted corner and record whether it follows a crease, contact point, or wet edge. Repeat a typical cycle before approving the position. If more than one pack size uses the label, check the smallest size and record its approved spot separately. Keep an unused sticker with the photos so you can compare the print after later use.
If the cooler carries more than one size of ice pack, check which side remains exposed when staff restock it. Label a spare pack in that same position before repeating the test.
See the freezer label surface test for a related check.