Davao Sticker Custom
Show the bumper in relation to the painted body
Take a straight photo and two corner views, then a close photo of the finish beside the paint. Tell the installer if you know the bumper material or if it has a brushed-look surface treatment. Mark whether the bumper will stay exposed and which panel the wrap will cover. If the bumper may change, show the planned part separately.
Compare the film next to the actual finish
Ask for the exact wrap sample and look at it beside the bumper in open shade and daylight. Use the same positions for both samples if you have more than one. Look from straight on and along the brushed pattern. Decide which view best represents how you use or display the vehicle.
Approve the line where the body color ends
Ask for a drawing showing where the new film stops at the bumper joint. If you want the bumper itself assessed, ask which material the installer needs to identify and have them quote that part separately. Compare any alternate boundary on the same photo before approving the change.
Check whether the bumper stays visible in the chosen setup
If a guard or trim piece overlaps the metal, compare the sample with that piece fitted. Ask the designer to show where the contrast changes from the usual approach. Mark the exposed bumper on the estimate so it is clear what the wrap will cover.
Save the sample and viewing angle
Keep the exact film, sample, and approved drawing with the quote. At pickup, check the contrast and edge beside the bumper in comparable light. Take a close photo of the boundary for future work.
For evaluating wrap color beside another contrasting part, see the contrasting grille wrap proof guide.