Davao Sticker Custom
List the parts that need an identifier
Lay out the watering bottle, tray, and any separate fittings. Decide which label identifies the whole kit and which ones tell the parts apart. Mark where water usually runs and where hands grip each piece. Keep any instructions away from moving parts or an opening. Show the printer the material for each position and ask which samples suit the way the kit is used and cleaned.
Rehearse a refill with the actual kit
Apply the recommended samples as directed. Fill the kit and use it for a normal watering session. Read the labels while the parts are assembled and again when staff take them apart to dry. Note whether a corner rubs the tray or stays under a drip. Compare a second sample away from the wettest part before deciding whether to move the label or change its material.
Check how the labels look after storage
Clean the outside using the approved method and put the kit away. Read each identifier before taking everything out again. Record which parts passed and save a photo of the approved position. If the set changes bottle size or tray material, test that piece separately.
Give the kit owner a replacement reference
Keep one unused sticker with its part name and the approved care notes. Confirm the same label can be found when a part is replaced.
If the parts dry on separate shelves, check the labels in those positions. Make sure a worker can match the pieces when rebuilding a kit.
See the watering can label trial for a related check.