Davao Sticker Custom
Use the panel’s narrowest clear area
Photograph the fitted panel and measure the height between trim, fasteners, and other features. Mark where the body curves away from view. Give the designer the whole word or line, including any small capitals or punctuation, and ask for two actual-size proofs with the same layout and different letter heights.
Compare both proofs on the parked bike
Hold each paper proof against the intended panel. Look from the position where people normally see the bike, then from another angle. Ask someone to read the wording out loud. If a larger size pushes the last letters around a curve, try shortening the line or using another panel rather than comparing only the first few letters.
Check that the selected size can be made
Ask the printer to trial the exact lettering in the chosen vinyl. Review the small details and any enclosed spaces after they remove the waste film. If the sample needs wider strokes or more room, have the designer adjust the artwork and repeat the paper proof at the same height.
Write the height and overall size on the proof
Record the letter height as well as the total width and height of the piece. Save a side photo showing the chosen position, and check the other side separately if it has different trim. If the bike needs numbers as well as a name, run the same size test for both. Give the printer the smallest approved version separately so it cannot be confused with the larger lettering on another panel. Label the panel on the print order.
Use the cut vinyl stroke guide to review fine details after choosing the letter height.