Davao Sticker Custom
Start with the unit number staff actually read
Get the current roster and choose the longest ID plus one that could be confused with it. Photograph the parked vehicle square to the panel and from the angle where staff check it. Mark where the panel turns away, narrows, or meets hardware. Measure the clear area rather than relying on the apparent width in the angled photo.
Compare one position nearer the flatter section
Try the same paper label in two places on the parked vehicle. Ask staff to read it from the usual approach. If one end seems compressed or vanishes around the panel, move the entire label before changing its size. Keep the label clear of any trim or working features. Ask the installer to confirm the film for the selected surface. If the roster uses a prefix and number, check that both are legible before choosing a location. Ask the staff member to read the whole ID rather than guessing it from the first digits.
Try a larger line only if the clear area allows it
Hold the second size at the chosen position. Check that every character stays visible from the same angle and the line still fits within the measured area. If neither proof reads well, use a suitable alternate panel. Mark any body style that needs a different position.
Record the reading position and size
Save a photo from the staff approach and the dimensions on the approved proof. Give the installer the measured reference and exact unit code. Record which clear panel width the label uses so a later proof can match it.
Use the fleet unit layout guide to confirm the format staff already use.