Skip to content
Cart
← The DSC Journal

Choosing a sticker finish under a display cover

Compare mounted samples with the cover closed so you can see how reflections, contact, and the viewing angle affect the label.

Covered display sticker finishes
Davao Sticker Custom

Use the cover in the proof setup

Place the label where it will sit on the actual product or display. Close the cover and stand where customers look. Mark any light source that reflects in the cover and any point where the cover touches the label. Ask for matching printed samples in the finishes you want to compare. Keep the artwork and mounting position the same so you can see what the finish changes.

Check the smallest words from several positions

Read the samples straight on and from the normal approach. Check with the cover closed and briefly open it to see which reflection comes from the cover. Swap the sample positions and repeat. If one word disappears only under the cover, see whether moving the item within the display helps before changing the artwork. Check whether the label stays clear when the cover closes.

Keep the approved viewing conditions with the sample

Save a photo of the covered display and record the finish, shelf position, and normal light. If the cover or its lighting changes, compare a retained sample before repeating the print order. Mark which surfaces should remain visible around the sticker.

Try the sample with the cover at its normal height and with a neighboring product in place. If that product blocks the light or reflects into the cover, check the smallest word again. Record which setup gave you the least readable result. Keep a photograph from that position for the next review.

See the display lighting finish guide for a related check.

Request a project quote

Send the display cover and the finishes you want to compare.

Discuss your project →