Skip to content
Cart
← The DSC Journal

How to review a roof wrap proof around a sunroof

Mark the glass, moving panel, seals, and remaining roof on the proof before agreeing where a roof wrap should end.

Vehicle graphics
Davao Sticker Custom

Identify the roof and the moving parts

Photograph the roof from a safe position. Tell the installer which vehicle and roof option you have and whether the glass tilts, slides, or stays fixed. Use the vehicle manual to identify any pieces that move. Have the installer inspect the roof and note the glass edge, seals, tracks, and any other hardware that needs clearance.

Show the coverage as separate areas

Ask for an overhead proof that distinguishes the painted roof, glass, and trim. Mark where the film should stop on the painted sections. If the design uses a solid color, compare a version that keeps the glass as a visible break with one that adjusts the shape of the color on the surrounding roof. Discuss the boundaries with the installer before approving either version.

Review the open and closed positions

With the vehicle parked, ask the installer to check the proposed boundaries against normal operation. Keep glass, seals, openings, and moving parts clear unless the vehicle and product guidance specifically supports the proposed treatment. If the proof shows one continuous design across the roof, have it revised to show where the sunroof interrupts the artwork.

Record what you expect at handover

Approve the roof proof with the actual coverage limits marked. Agree how the shop will check normal operation after the job, and keep the proof with the vehicle record. If the designer prepared the artwork using a different roof option, request a new top view. Check the glass outline against the vehicle before the film goes to production.

Use the roof hardware planning guide if the same job includes an antenna or roof rails.

Request a project quote

Share roof photos showing the sunroof and tell us which roof areas you want wrapped.

Discuss your project →