Davao Sticker Custom
Identify why the spare panel is fitted
List the normal panel and the spare with a photo of each. Note whether the spare is used during service, after a repair, or for a different job. Confirm which one the customer usually sees. Ask the wrap installer whether they need to examine both panels and their finishes before selecting a proof.
Compare both installed positions
Have the person responsible for the parts fit each one as intended. Take the same view of both configurations and show the neighboring panels. Mark any different edge, handle, or fastening point. Even when the parts cover the same opening, the installer can use these details to decide whether the same wrap outline applies.
Put the material sample next to the surrounding finish
Hold the proposed sample next to the existing wrap in light similar to where the vehicle is used. Check the color from more than one angle and record which panel the sample represents. If one panel is used only occasionally, ask whether to wrap it now or save an approved material reference for later.
Record the job under both panel identifiers
Keep the spare and active photos with the film reference and approved outline. Write down which piece received the film and which needs a separate order if it is fitted later. At pickup, compare the matching line with both images before storing the spare.
If the spare is fitted only during workshop visits, compare the design with it in place before deciding whether it needs a finish match. Save one marked photo showing how the surrounding stripe ends when that spare is fitted.
For a matching decision after a repair, see the replacement door wrap guide.