Davao Sticker Custom
Identify the line staff use from the platform
Ask the loading crew whether they need the unit ID, business name, or a routing detail. Have them show the normal viewpoint while the van is parked. Follow site access rules and use a safe location. Photograph the view and show which panel is hidden by the platform edge, rails, or nearby equipment.
Compare the height of two placements
Ask for the same copy at two heights on a side or rear proof. Hold the samples on the parked vehicle and have a reader look from the platform. Check that the complete line reads when the van is at its usual loading position. If a low line disappears behind an edge, test a suitable higher panel. If the crew needs to read the same number while the rear doors are open, show that setup on the proof. Compare a fixed side position if the platform hides the original line.
Check a second view used on shift
Look from the approach where staff confirm the vehicle before it reaches the platform. If a high line works at the platform but is hard to find from the ground, consider a separate identifier for each position. Keep doors, lights, and working features clear in the proof.
Save the platform and ground views
Record the approved dimensions and exact viewing position. If a second depot has a different platform height, repeat the check there. Give dispatch the tested positions and a photo showing the normal loading setup for each one. Date both photos and identify the depot.
Use the loading bay graphics check for the wider depot layout.