Skip to content
Cart
← The DSC Journal

Checking small cutouts in die-cut sticker artwork

Mark which internal openings need a physical cut and test narrow bridges and tiny details on a printed sample.

Die-cut artwork
Davao Sticker Custom

Mark every opening that needs to be physical

Take a copy of the artwork and point to any hole or gap that should let the surface show through. Distinguish it from an opening you want represented with printed color or clear film. Give the printer the finished width and height so they can see the opening at production size. Ask how the material and backing would look in that area when someone receives the sticker.

Check the material around each opening

Look at narrow strips between a hole and the outer cut. Print a proof at actual size and ask the printer to assess the smallest gap and thinnest bridge. If the design uses several holes close together, ask whether joining or enlarging one would simplify the cut. Compare that option on the proof before changing the artwork. Keep any line or text that matters clear of the revised outline.

Peel the proof the way a customer will

Try a sample on the intended surface and watch whether the narrow sections bend, tear, or stay on the liner. Check whether the background shows through where you planned. If you need a change, mark the exact opening on a photo and send it with the proof version. Check the replacement at the same finished size.

For edge margins around a revised cut, use the bleed and safe area guide.

Request a project quote

Send the artwork at finished size and mark which internal openings need to be cut out.

Discuss your project →