Skip to content
Cart
← The DSC Journal

How to check reflective logo decals on a rear cargo door

Compare the logo on the fitted rear door in daylight and controlled low light, while keeping safety and working features clear.

Vehicle graphics
Davao Sticker Custom

Check what the logo needs to do

Ask the fleet contact whether the reflective logo is for branding or subject to a separate specification. Confirm any requirements before choosing the material. Photograph the cargo doors with the vehicle parked. Mark lights, plates, reflectors, hardware, and cameras. Ask the installer to confirm which surfaces the product suits and keep working features clear.

Compare the sample with the doors shut

Hold labeled samples on two suitable positions and look from straight on and a rear corner in daylight. Keep the logo complete on one clear part. Check the wording against the approved artwork and note any trim or latch that makes the outline hard to recognize. If a logo has small words and a large symbol, ask the reader to identify both from the same position. Decide whether the symbol alone meets the intended branding goal before reducing the size.

Repeat under controlled low light if needed

Use a private parked setup and keep the light and observer position consistent. Ask a reader to identify the logo or repeat the wording. Take photos to document the result and have the responsible fleet contact verify any requirements separately. Remove samples before opening doors or using the vehicle.

Save the chosen door position and sample

Record the product, location, and size. If the logo should remain visible while one door is open, include a photo of that parked setup and confirm the selected position. Keep the daylight view and any low-light comparison labeled with the door and sample. Record which view confirmed the approved logo.

Use the reflective photo proof guide to document the light and camera positions.

Request a project quote

Share the logo sample, rear door photos, and any relevant marking specification.

Discuss your project →