Skip to content
Cart
← The DSC Journal

Testing waterproof stickers on a reusable picnic tray

Check a label on the outside of the tray through carrying, wiping, nesting, and the way it dries between uses.

Reusable picnic tray stickers
Davao Sticker Custom

Choose a position clear of food and handling surfaces

Set the tray out as it will be used. Mark where hands grip it, where another tray touches it, and which part staff can see before unstacking it. Choose an exterior spot that keeps the sticker clear of food-contact areas. Tell the printer the exact material and the cleaning process the sample must face. Put a mockup in the proposed position and carry a loaded tray.

Run a printed sample through one typical outing

Apply it as directed and check the edge first. Carry the tray, set it down, and clean it as usual with the approved method. Check for scuffs near grips and lifted edges after the tray dries. If trays nest, put the sample back in the stack and compare it with another sample away from the contact point. Photograph any change before touching it.

Read the tray ID at the next setup

Check whether staff can identify the tray without moving the stack. Record the material and location that passed. Keep one unused sample and one applied reference for another run.

Separate water exposure from nesting wear

Leave a matching sample outside the stack after washing and compare the two once both trays are dry.

If the trays dry overnight in a rack, leave the two samples there for the normal interval and inspect them before loading the stack again. Compare the edge near a drain path with the drier sample and mark which location staff can reach easily.

See the waterproof sticker trial guide for a related check.

Request a project quote

Send the tray material and show how you carry, clean, and stack it.

Discuss your project →