Skip to content
Cart
← The DSC Journal

How to check a reflective sticker at a garage exit

Compare a reflective decal sample in the lighting and angle of a garage exit using a safe parked test.

Vehicle graphics
Davao Sticker Custom

Define what someone needs to see at the exit

Ask the fleet contact whether the decal is a unit ID, business name, or marking with a separate specification. Confirm any required specification before choosing a sample. Identify where the reviewer normally sees the vehicle. Use a safe private parked setup that represents the approach rather than standing in the active exit lane.

Keep the light and viewing position fixed

Compare labeled samples on the actual paint or intended panel. Mark a camera or observer position and record what light you use. If the exit has a change between overhead lighting and daylight, check both conditions with the vehicle parked. Keep the sample size and viewing angle consistent when comparing two materials. Note whether the usual exit view is from a higher or lower position than the parked panel. Ask the reviewer to repeat the comparison at that angle where it is safe.

Check that the marking can be read as well as seen

Ask a reader to say the unit number or name. If an edge catches light but the wording remains unclear, compare a different position or clearer lettering. Keep lights, plates, reflectors, and working parts clear. Review the sample in person so you can tell when the camera exposure makes the result look different.

Save the viewing record with the material

Record the sample code, panel, angle, and lighting. Ask the approver to identify the selected position and retain any marking requirements with the proof. Keep a photo of the test setup as well as the close view. Record which light was on for each result.

Use the reflective photo proof guide to keep the samples and lighting setup comparable.

Request a project quote

Share the proposed marking and describe the garage exit lighting and viewing position.

Discuss your project →