Skip to content
Cart
← The DSC Journal

Checking a logo sticker on a silver pouch

Compare logo samples on a filled silver pouch and see whether reflections, wrinkles, or the film edge change what shoppers can read.

Silver pouch logo proofs
Davao Sticker Custom

Find a panel that stays clear on the filled pouch

Stand the pouch at the angle you expect on a shelf. Mark the area that stays flat while the sides bow and the top folds. Hold a mockup against the panel and check where the silver surface catches light. If the logo crosses a strong crease, try moving it before changing the artwork. Photograph the pouch upright and from the side for the printer.

Compare a clear and a solid background

Apply matching samples and tilt the pouch under the intended light. Look at the smallest lettering first and check whether a reflection crosses it. On a clear sample, decide how much silver you want to show through. Ask for a solid area or a white base behind the artwork if the logo needs more contrast. Compare that sample in the same spot before approving it.

Check more than one pouch in the lineup

Put two filled samples side by side and compare the logo at a normal viewing distance. If the artwork works only at one angle, try another position or finish and run the same check. Keep the selected sample with its placement, stock, and lighting notes.

If the shop stacks the pouches in a tray, compare the front sample with one farther back. Check whether the top of the tray or the pouch in front hides the part of the logo that gives it contrast.

For a separate check of how light changes a finish, see the display lighting label guide.

Request a project quote

Send a filled pouch photo and tell us where the logo must remain legible.

Discuss your project →