Davao Sticker Custom
Find the box center with it mounted
Put the motorcycle in its usual parked position and take a rear photo of the closed box. Mark the center of the usable face and compare it with the centerline of the motorcycle. If the latch, trim, or reflector divides the face unevenly, mark both the geometric center and the center of the available space. Show both to the designer.
Make paper proofs for the two positions
Print the same logo at the proposed size and have someone hold it at each marked center. Look from directly behind and from a rear corner at the height where people usually see the box. A logo with most of its detail on one side may look off-center even when its outer edges have equal space. Choose a position by looking at the actual face.
Check the lid and latch in use
Open the lid and watch where your hand grips the box. Mark any hinge, seam, raised trim, latch, or reflector that must stay clear. Ask the installer to confirm whether the proposed material suits the box surface. If the decal crosses a seam or steep change in shape, ask for a smaller proof within the clear area.
Give the shop a repeatable placement reference
Record two measurements from fixed points on the box and save a square rear photo with the chosen position marked. If the box moves between bikes, check it in the other mounting position too. If you remove the box often, record which way it sits when the mount locks in place.
See the removable accessory graphics guide if other parts of the design also come off the vehicle.