Davao Sticker Custom
Treat the two windows as separate surfaces
Photograph the left and right windows from outside and mark which side the driver sits on. Identify which part of each window is fixed or movable, and show the trim. Ask the installer to verify the film, vehicle guidance, and applicable requirements before planning any decal on the glass. Keep the driver’s needed view and all working parts clear.
Review the reading direction on each side
Ask the designer for two outside-view proofs labeled left and right. Check that lettering reads normally from outside, including any phone digits. If the layout uses a directional shape, decide whether it should point toward the front on both sides. Confirm which side of the glass the installer has approved for the material.
Compare full footprints from both seats
Use paper shapes only with the car parked. Ask the driver to look through each area from their normal seat position. Check the passenger view too if it matters to the use of the vehicle. If a footprint interferes with a needed view or the installer cannot confirm the application, move that piece to a painted panel.
Save the approved proof and side labels
Record which pieces belong to each window and remove all mockups before driving. Keep the placement and product details with the order. If the printer prepares both pieces on one sheet, make sure the left and right labels stay outside the decal art. Ask the installer to compare the sheet with the approved outside views before fitting either piece. Keep both labels visible at handover.
For a separate small window behind the door, see the rear quarter glass placement guide.