Skip to content
Cart
← The DSC Journal

Setting the artwork safe area on a hexagonal sticker

Keep text and logos inside the six angled edges by checking the actual cut outline instead of its enclosing rectangle.

Hexagonal sticker artwork
Davao Sticker Custom

Set the shape and its orientation before adding text

Draw the six-sided cut and mark which way the sticker will face. A point at the top and a flat edge at the top leave different space for a headline. Specify the finished width and height in that orientation. Ask the printer for the safe area and bleed guidance for that shape. Keep the cut path on the proof so you can see where the angled sides approach the artwork.

Check the corners of every text block

Center the design on the shape and look at the first and last characters in each line. A short word can fit beside a sloped edge where a longer one would crowd the cut. If you add a logo or a code, inspect all four corners of that block against the safe area. Move important details inward or adjust line breaks before reducing all the text. Extend the background past every side where it reaches the cut.

Read the mockup in the intended orientation

Print the design at finished size and cut a paper sample along the outline. Set it on the intended package and check whether the center mark still feels balanced. Rotate it only if the layout will actually go on that way. Mark the top on the proof if volunteers or packers need that reference when applying it. If a second version faces a different way, approve its text placement separately.

For the distinction between the background and the finished outline, see the sticker bleed and safe area guide.

Request a project quote

Send the hexagon dimensions, intended orientation, and artwork that must fit inside the cut.

Discuss your project →