Skip to content
Cart
← The DSC Journal

Checking artwork for a sticker with a printed measuring guide

Print the guide at actual size, check several marks against a reference, and repeat the check on the intended surface.

Printed measuring guide proofs
Davao Sticker Custom

Define how people will use the marks

Show where the printed scale starts and ends and what someone lines up with its zero point. Record the units and the length between two named marks. Ask who needs to approve the accuracy for its intended use. If the scale helps people position a part or line up a package, include that part in the proof. Keep the measuring marks away from the edge of the cut.

Check the printed proof against a separate ruler

Print a sample at actual size and compare the distance between several marks with a reference you trust. Check near both ends and in the middle. Ask for the dimensions on the finished sticker before approving it. If a proof was reduced to fit a page, print it again using the proper size and verify a known distance. Keep the accepted scale and units in the artwork file notes.

Check the scale again after application

Apply a sample to the actual surface using the intended method. Align the starting mark and check the same distances again. If the sticker bends around an edge, decide which portion people can use and verify it in that position. Record the approved application surface and sample. If the guide is only a placement aid, state that in the brief so people understand the accuracy it needs.

Give the person checking the guide the approved proof number and the expected distance. Record the measured result next to it so a second review can repeat the check.

See the actual-size print proof guide for a related check.

Request a project quote

Send the finished dimensions and the scale or reference marks you want on the sticker.

Discuss your project →