Skip to content
Cart
← The DSC Journal

Applying a printed sticker sample to a textured sleeve

Compare contact on the textured and flatter parts of the same sleeve, then inspect both after fitting and handling.

Textured sleeve sticker samples
Davao Sticker Custom

Mark the surface the sticker will touch

Open the sleeve and look at the raised or rough area from the side. Mark where the proposed sticker crosses it. Find a flatter part of the same sleeve to use as a comparison. Show the printer the sleeve on the packaged item as well as flat. Ask for a printed sample suited to the texture and confirm when it should go on during packing.

Apply matching samples to the two positions

Use the recommended directions and give them the same time before handling. Fit the sleeve onto the package and check whether the label changes shape as it passes around the edge. Look at the print under angled light and see whether a rough area shows through. If an edge lifts, mark the exact location and compare it with the edge on the flatter control. Avoid pressing it back down before taking a photo.

Approve a position staff can repeat

Have a packer apply a fresh sample and fit the sleeve the usual way. Check it after stacking and again when the sleeve comes off. Save one approved assembly and record the texture, label material, and application stage. If the sleeve supplier changes the finish, pull that reference before repeating the order.

If the sticker spans both raised and smooth areas, photograph the transition before handling. Compare it again after fitting the sleeve so the printer can see whether the line changed during assembly.

See the textured packaging sticker guide for a related check.

Request a project quote

Send a sample sleeve and mark the textured area the sticker needs to cover.

Discuss your project →